A list of electronic and mechanical specification, a description of the features, “in the box” included items, and a list of supported accessories.

Specs & Features

 

  • Motor – 24V DC
  • Input – 110-120v @ 50/60Hz
  • Input Power – 100W
  • Ambient Temperature Rannge – (-)13°F-122°F
  • Max weigh for each gate leaf – 770 Lb
  • Max Gate Width – 8′ 2″
  • Max Opening Angle – 120°
  • Protection Level (IP) – 24
  • Max Travel Distance – 1′ 1/2″
  • Working Capacity – 50 continuous cycles.
  • Weigh per Gear Motor – 13.2
Features

  • Motor – 24V DC
  • Input – 110-120v @ 50/60Hz
  • Input Power – 100W
  • Ambient Temperature Rannge – (-)13°F-122°F
  • Max weigh for each gate leaf – 770 Lb
  • Max Gate Width – 8′ 2″
  • Max Opening Angle – 120°
  • Protection Level (IP) – 24
  • Max Travel Distance – 1′ 1/2″
  • Working Capacity – 50 continuous cycles.
  • Weigh per Gear Motor – 13.2
Content goes here in the box included

  • Motor – 24V DC
  • Input – 110-120v @ 50/60Hz
  • Input Power – 100W
  • Ambient Temperature Rannge – (-)13°F-122°F
  • Max weigh for each gate leaf – 770 Lb
  • Max Gate Width – 8′ 2″
  • Max Opening Angle – 120°
  • Protection Level (IP) – 24
  • Max Travel Distance – 1′ 1/2″
  • Working Capacity – 50 continuous cycles.
  • Weigh per Gear Motor – 13.2

Mechanical Specifications

 

Completely Irrelevant information:

Motor – 24V DC, 12 Amps
Cycles – 100 / Day
Shipping Weight – 57 lbs.
Torque – 600 lbs. of torque
Finishing – Aluminum
Capabilities – Maximum gate size 15′ wide and 600 lbs.
Operator Travel Speed – 14 to 18 seconds 90º opening
Approval – UL and ETL listed to the latest UL325 and UL991 specifications
Operator Arm Dimensions – Length: 39.5″, Width: 3.5″, Height: 4″
Electrical Specifications

Running System – Uses a microcontroller with built-in “watchdog” system.
Modular Board – Board uses LED’s to indicate all input and output functions.
Reversing Sensor – When the gate makes contact with an object while opening or closing, the gate will reverse for 1 second then go into neutral, so it can be pushed by hand.
Timer – Can be set from 3 to 60 seconds, or “push-open/stop/close” operation.
Safety Loop Input – Anti-tailgating system uses a “stop only” method of operation. Will not work as a commercial loop system.
Alarm Output – Can be interfaced with any home alarm system. Alarm will sound if the gate is forced open manually. Optional siren can be installed.
Surge Suppressors – Protected by surge suppressor board included.
Alternate Outputs – Sensor alarm, alarm system, and magnetic locks.
Electronic Inputs – Any type of radio receiver, full-control system “push-open/stop/close”, safety loop, photocell, telephone entry, and key switch.
Housing Finish – Weather proof.
Optional Solar Input – The optional Solar package allows the Miracle-One™; to operate as an independent unit with the use of optional DC Adapter and Solar Panel.
Control Board Housing Finish – Entire housing is polyethylene plastic.
Control Board Housing Dimensions – Length: 10.5″, Width: 4.25″, Height: 12″
Includes:

One operator arm
AC transformer
Two 7AH 12 volt DC batteries
Control box/control board/surge protector board
Receiver (LiftMaster 355LM Security+ ERT)
Mounting hardware
Installation/safety manual
Caution signs
Audio alarm – can be interfaced with home alarm system